Madmaxwell87
Observer
Got new tailights for Christmas so got a 3rd brake light to go with them and installed them. Also got my Garmin BC35 moutned and wired up and synced with my Overlander.
Prevolander 93 Bronco
- Thread starter Madmaxwell87
- Start date
Madmaxwell87
Observer
In an effort to get the rear area more organized and useable I purchased two sets of Mac's tie down Versatie Track3 and some Frontrunner Wolf Packs. I had planned to put sound deadening under the existing carpet but didn't like the idea of mounting the track kits through the carpet. So...I pulled out the carpet and rear seat.
I scuffed the whole area up with 120 grit and sprayed on 3 coats of Plasticote spray on bedliner. I am letting it dry/ harden for a few days before I install anything but so far I like the texture. Next up is the track kits on either side of the bed area and the Wolf Packs in between then. I am going to have a fluids/repair box and an off road recovery/tools box to start. Once I get it out and use it more I might add a food box or save up and get a fridge.
I scuffed the whole area up with 120 grit and sprayed on 3 coats of Plasticote spray on bedliner. I am letting it dry/ harden for a few days before I install anything but so far I like the texture. Next up is the track kits on either side of the bed area and the Wolf Packs in between then. I am going to have a fluids/repair box and an off road recovery/tools box to start. Once I get it out and use it more I might add a food box or save up and get a fridge.
Madmaxwell87
Observer
Finished up the rear of the bronco. Got the tracks installed and mounted the boxes with the strap.
Next up is installing the Protofab rear bumper when its done being built.
Next up is installing the Protofab rear bumper when its done being built.
Similar threads
