Show Me Your Winch Bumpers!!!

[lcsodiver]

Well here's mine, I built from scratch. I haven't seen any pre-made bumpers for the Discoverys that will carry a 8274.

 

[92 red cummins]

my 92 dodge with home made winch mount

 

[jgwjr]

buckstop on my dually

 

[Ric]

Heres mine on the 99

Well now I have an 04 4Runner, Ill probley do something real close on the front, and the rear will have a tire carrier and hidden winch. :victory:

 

[FlatlinesUp]

Still a work in progress, have yet to add lights, shackles, receiver etc

 

[chrishaynesusa]

Here is my Xterra 2005 with a Calmini bumper and a Warn HD powerplant.
12000 lbs of pull with an air compressor.

 

[78Bronco]

Here is my Xterra 2005 with a Calmini bumper and a Warn HD powerplant.
12000 lbs of pull with an air compressor.

Have you found engine cooling to be a problem with that rather giant winch.

 

[chrishaynesusa]

not yet. But I have not put the grill back in yet either. '

maybe this weekend.

 

[alexrex20]

ARB Sahara minus all the fancy chrome, plastic, and rubber pieces.

Warn M8000 and GE Q4509 airplane landing lights in the fog light recesses.

 

[GrassCat]

This is an ARB for a Jeep Grand Cherokee mounted on my Montero. Pretty easy to make the brackets work. Now I need a winch for it!

barnstormer,
I like that bumper and would like to get one for my 1998 Montero. What year should I be looking for?

 

[Mighty Dodge Ram]

ARB Sahara minus all the fancy chrome, plastic, and rubber pieces.

Warn M8000 and GE Q4509 airplane landing lights in the fog light recesses.

Looks good on your rig, though. What did you use to plug the holes in the top plate for the fancy chrome bar? I have one for my Dodge and am also not particularly enamored with the chrome. :sombrero:

 

[saburai]

Custom AJ's front and rear

 

[alexrex20]

Looks good on your rig, though. What did you use to plug the holes in the top plate for the fancy chrome bar? I have one for my Dodge and am also not particularly enamored with the chorme. :sombrero:

nothing. there are a bunch of bare holes from where the chome bar was mounted, as well as the rubber "bumperettes" and the hard plastic lower trim piece. i don't mind the exposed holes as much as i did the busy look with all the extra stuff.

 

[fabjunkie]

Here's the one I built for my Tacoma. I haven't cut the fairlead hole yet, but will once I get a winch. Not sure what I'll get yet, but I designed it to fit up to most 9,500lb winches. Going to add grill and headlight hoops later.

 

[getlost4x4]

mine

one i built for a cherokee