Here is a link to the ones we bought: https://www.amazon.com/dp/B000SP02R...olid=3GFK5NW5FR5LU&psc=0&ref_=lv_ov_lig_dp_itWe got those from Amazon. I'll see if I can find the specific model info
Here is a link to the ones we bought: https://www.amazon.com/dp/B000SP02R...olid=3GFK5NW5FR5LU&psc=0&ref_=lv_ov_lig_dp_itWe got those from Amazon. I'll see if I can find the specific model info
I am running 5x5.5 Wheels (Ram 1500) on my Jeep and also on the Trailer to accommodate a single spare wheel & tire. I used simple adapter spacers. I had used them on rigs before with no issues if locktite and proper torque applied (Assuming quality spacers).Would much modification be required to bolt up wheels from a 2019 ram 1500?






The beginning of the side panels.
View attachment 491013
Now thats a beautiful work station.


I took the wife and kids to a motel and went back to scout the area with a friend and extra Jeep. There was a gate at the corner where we dropped the trailer, so I found the land owner and asked if we could use his land. There was a creek cutting across the land so we couldn't go that way, but I did move the trailer into the pasture to make me feel a little better about leaving it over night. The next morning I called a towing company and they brought out a skid steer but were afraid of getting the skid steer stuck and turned down the recovery. A fellow overlander I found on facebook lived nearby and came to the rescue in his truck plus another jeep. I pulled the trailer around the pasture some to get the wheels rolling again. We all strapped together but his Tacoma was too low and was having a hard time keeping momentum so we unhooked him and let him make it to the top. The two Jeeps were then able to pull the trailer out. 

