Snow Peak Addiction

[Lennart]

add more adjustable legs to your setup?
Or perhaps you could McGuyver something with the IGT height adjusters to lower the extention table coming from the rail to match the rest of the setup?

 

[Lennart]

Almost felt likt summer in the Netherlands yesterday so I had a little grill party in our tiny garden. I set up the Jikaro table. I don't use it often, but when I do, I always like it

Happy Grilling

 

[RKRUGER]

@Lennart thanks. I wish Drifta still carried the legs they made that were infinitely adjustable. They are so slick.

 

[jerdog53]

Ok Snow Peak geeks ;-) so I’ve played with this set up on the back of my 100 series. Very similar to another addict on here and I have to blame him for a much lighter wallet.

View attachment 876328View attachment 876329
So the other day I was thinking why not grab this connector link

Stainless Kitchen Table IGT Extension Connector

The Stainless Kitchen Table IGT Extension Connector connects to the exterior frame of the Stainless Steel Kitchen Table, providing slots for connecting additional IGT features. Contents include a single connector to use on either side of the Stainless Steel Kitchen Table.

www.snowpeak.com

And bolt it to the fender on my Chaser trailer. Why should the Cruiser only get IGT love?

But even with the air bags empty, the top of the rail is 930 mm. I can use my Drifta adjustable legs to make it level, but I need something else to make it work going around the corner. Any ideas?
View attachment 876330View attachment 876331

View attachment 876333

View attachment 876332

Why not make a bracket to lower the attachment to the fender?

 

[RKRUGER]

Fresh turkey nuggets!

 

[Borrego60]

Almost felt likt summer in the Netherlands yesterday so I had a little grill party in our tiny garden. I set up the Jikaro table. I don't use it often, but when I do, I always like it

Happy Grilling

View attachment 876361

Love the table and grill combo. I also have the grilling pan that fits the fire pit. love doing Habachi style foods with friends. great times.

 

[TooGouda]

Ok Snow Peak geeks ;-) so I’ve played with this set up on the back of my 100 series. Very similar to another addict on here and I have to blame him for a much lighter wallet.

View attachment 876328
So the other day I was thinking why not grab this connector link

Stainless Kitchen Table IGT Extension Connector

The Stainless Kitchen Table IGT Extension Connector connects to the exterior frame of the Stainless Steel Kitchen Table, providing slots for connecting additional IGT features. Contents include a single connector to use on either side of the Stainless Steel Kitchen Table.

www.snowpeak.com

And bolt it to the fender on my Chaser trailer. Why should the Cruiser only get IGT love?

But even with the air bags empty, the top of the rail is 930 mm. I can use my Drifta adjustable legs to make it level, but I need something else to make it work going around the corner. Any ideas?


View attachment 876333

View attachment 876332

Im in the process of building my own trailer from scratch. v1 is a soft top with frontrunner load bars that ill put a ski box and a Thule Foothill RTT on. I still need to get around to fabbing the rear barn door but i test fit my IGT with the standing legs and so far i found that any variance within a couple inches can be handled with the foot and or a small board etc. bigger variance i assume I can handle either with the height adjusters or adding addition mounting points on the barn door.