Two teardroptrailers from fiberglass component kits

[two]

Doing the Scotty Sportsman Jr.style. I don't' want tight bends . So will be using six R24'' curves .When I do a benroy it will have R24''in the front. I have been ask to build 2 more Jr.style shells. so I built a jeg . I can just drop and go

 

[two]

rear hatch

I need too find out how tall the rear hatch is on a Serro Scotty Sportsman Jr . When I lay it out it seams to small it can only be 27'' high. If I make a sharper turn I can get a 32'' high hatch opening

 

[two]

After many starts here I go
. As the first trailer that I'm starting is a Serro Scotty Sportsman Jr style. The parts that I will be using are 2 ea R24'' , 1 ea R48'' that will be cut in haft & 30 feet of top flange.

#1 Find where the flat to curves mark is .There a dot you have to find it's a lineament mark

 

[two]

On the first two trailers the front tops have a 24'' radius top corners. Using a square to find where the radius begins