UJOR Build Thread

[Dgurley2000]

I vote for Chris' next project to be an E-350 6x6 as seen on unUrban's thread. Might not be practical outside of snow an ice, but would be really cool!

 

[Ozrockrat]

I vote for Chris' next project to be an E-350 6x6 as seen on unUrban's thread. Might not be practical outside of snow an ice, but would be really cool!

If I put all the stuff the missus wants in the ambulance I will need 6x6. Maybe a little less rubber on the ground though.

 

[ujoint]

I vote for Chris' next project to be an E-350 6x6 as seen on unUrban's thread. Might not be practical outside of snow an ice, but would be really cool!

Thats all I need!! Imagine the "compensation" comments I'd get (as if I don't get them already)

If I put all the stuff the missus wants in the ambulance I will need 6x6. Maybe a little less rubber on the ground though.

Just do it!

 

[ujoint]

V4 hangers are back from PC & mounted. The pass side F bumper bracket had taken a hit at some point, so I cut it off & re welded it to the frame and it's good to go. I have an axle to build tomorrow, but I'm hoping to install the front axle and then pull the rear out.

 

[ujoint]

Finished up another D60 today, a Stage 2 with the RSC upgrade going to SoCal. Look at the monster brakes!!!!

 

[blupaddler]

That is some awesome work! I may be calling you in a day or so...



I think you should set up a temporary shop at Overland Expo and convert a lucky members van!

 

[MadChad]

Do mine please!

 

[ujoint]

That is some awesome work! I may be calling you in a day or so...



I think you should set up a temporary shop at Overland Expo and convert a lucky members van!

Did that last year here in NC, I plan to have fun at the AZ show

 

[ujoint]

Done!

 

[bknudtsen]

Now that is what I am talking about! Nice! :Wow1:

 

[ujoint]

Thanks!

Just finalized a sale to China!

 

[TangoBlue]

Thanks!

Just finalized a sale to China!

That's going to screw up the whole trade-balance thing now. Great Chris - just great.

 

[BIGVAN]

I was hoping for the cutaway version ……….. Just kidding! That’s WAY cool! What is the final weight on that bad boy?

:coffeedrink:

 

[ujoint]

That's going to screw up the whole trade-balance thing now. Great Chris - just great.

Sorry!!!

I was hoping for the cutaway version ……….. Just kidding! That’s WAY cool! What is the final weight on that bad boy?

:coffeedrink:

Yea, the cutaway would be really cool, and would have taken me an extra 6 months! Not sure of the weight, I'll guess at 200?? A buddy and I carried it in the house without cursing so I guess it's not too much. Lighter than I expected, I've already thought of ways to improve if I do another. (hide the casters in the block)

 

[ujoint]

So here is the 1st coil van that I'll be fixing this month. The 2nd will be here next week. This is a good example of someone lifting a Quigley & not being able to eliminate death wobble. The customer has had enough!! UJOR suspension here we come......



Yesterday was a big day for arrivals, and here is another victim! This 00 E350 7.3 with SMB pop top will be receiving a full makeover & 4" lift. Then it will head back to the west coast.