What did you do to your Expo Jeep today?

[usafjake]

One of my first of hopefully many posts here on Expo. Changed the Fuel pump out on my LJ only to find the harness was cut during my last foray off road. I will chock it up as preventative MX and a lesson learned (for the 98th time), Don't throw parts at a problem.

 

[usafjake]

One of my first of hopefully many posts here on Expo. Changed the Fuel pump out on my LJ only to find the harness was cut during my last foray off road. I will chock it up as preventative MX and a lesson learned (for the 98th time), Don't throw parts at a problem.

Also, this is an old pic, now it has 33X10.5R15 BFG All Terrains/rocker guards/Bestop softop/and too much other stuff to list.

 

[Viperus]

Are there a lot of JKs in Sweden?

Like Omar said they are not that many and a bit expensive to drive but its one of the coolest and so mutch fun to drive!

 

[heehawhardy]

Started on my bed/cargo storage setup

 

[GetOutThere]

Started on my bed/cargo storage setup

View attachment 247689

I did the exact same... made the trip and got the lumber cut. First step complete.

 

[Septu]

Received my new HD Sports Camera (Go Pro knockoff). ~$100 shipped. Has a wifi setup that will allow me to control it by remote (comes with) or through an app on my Nexus 7 Tablet that I use in my JK already. The remote is a simple 2 button design, while the app is suppose to let me view what the camera is viewing, as well as taking pictures from the video. Will see how that works.

Nothing fancy, but it comes with a ton of accessories that are all compatible with a Go Pro. I have a 32 GB card that's on the way. The idea for now is to use it in the JK attached to my edock.

Not normally a fan of buying knockoffs... but I couldn't justify the $300+ for a Go Pro. Especially as I know myself and how lazy I can be... editing video will not be fun or something I do with much enthusiasm. So I figured this will be a good place to start and see if I can actually get some use out of it. If I do... then I'll look into a GoPro.

Now just to wait for the ram mount and memory card to arrive.

 

[HAFICON]

Ordered a M.O.R.E dual battery tray and two 500 amp continuous 700 amp spike duty relays.

Not a bad price on the relays
http://www.caraudiogiants.com/pac-pac-500.html

Also another vendor of hard to find stuff.
http://www.texasindustrialelectric.com/home.asp

 

[expedition4x4]

finished storage unit in back, then installed a hellwig antisway bar in rear and picked up a set of airbags to be installed tomorrow before starting out east to eventually hit the expo in NC

 

[Beamer pilot]

finished storage unit in back, then installed a hellwig antisway bar in rear and picked up a set of airbags to be installed tomorrow before starting out east to eventually hit the expo in NC

Could you let us know about the ease of install and the changes following the road test. Thanks.

 

[heehawhardy]

Got my 2" Teraflex front/2" Synergy rear bumpstops in

 

[darksidecustoms]

Been a while between updates on here as it's been winter, but at the moment I'm prepping for a 3000Km road trip next month with the family (Sydney to Adelaide via Melbourne and back). Doing a tune up and fitting an adjustable track bar, bought a new 40L fridge freezer and CTEK D250S Dual charger to go with a 180Ah AGM battery along with power outlets for the fridge and rear seat. Building a drawer set next with fridge slide and possibly upgrading to the 99+ horseshoe style intake manifold with 60mm bored throttle body and heat shield wrap if time allows for better economy.
Also got an alloy bull bar and a snorkel to go on too.

 

[HAFICON]

Ordered two of these.
https://m.sears.com/details/guest/0...0100600&aff=Y&PID=6146822&AID=11042411#bottom

For my new dual battery tray.

 

[frenchlayer]

Replaced a faulty rear view cam

Sent from the ether

 

[au bronc n jk]

finished up the front end of a 3.5" AEV suspension install... more to come

 

[Expedition Essentials]

Repaired my broken Gerry can holders on my LOD and added braces so it doesn't happen again