Yeti Overland’s Tundra OVRLND Camper build

[crolison]

Next step in the propane addition is done, had some custom hoses made up at a local propane store.

 

[crolison]

Received an AT Overland jerry can mount in the mail today, so went ahead and mounted it up.

 

[crolison]

Finished up my camper side wiring, except for the propex heater. Using Blue Sea Systems switch panel, battery disconnect, scanstrut usb, and renogy solar controller.

 

[crolison]

Not sure why pictures are being a problem recently.

 

[bgraboyes]

which fan do you have installed?

 

[Mighty Dodge Ram]

Following your build...nice job! Quick question re: interior electrical panel. What material are you using for the backing plate? Thanks in advance.

 

[crolison]

which fan do you have installed?

Basic maxxfan

Following your build...nice job! Quick question re: interior electrical panel. What material are you using for the backing plate? Thanks in advance.

It is 1/4”abs plastic and 16” wide x 24” tall

 

[crolison]

Received an order of 8020 from tnutz.com for the interior build out and started the passenger side storage. Also testing out the propex location for space.

 

[Mighty Dodge Ram]

Thanks for the response!

 

[Waytall]

looking good !

 

[crolison]

Worked on the propex mounting, exhaust and intake routing a little bit today. Gives me a good idea of how much storage I’ll have once the install of the heater is done.

 

[crolison]

Worked some on the driver side storage, and got some wood cut for the platforms on the passenger side. Looking forward to all the storage I am gonna have with this setup.

 

[Cruisn]

Very impressive

 

[crolison]

Worked on the upstairs and downstairs ducting for the Propex 2800, and had some propane hoses made up. Now just waiting on a warranty on the propex thermostat to start this baby up!

 

[crolison]

Finished up cutting, coating, and installing the interior wood panels. Picked up a dfg fridge slide. Just have to get some tie downs and finish up some odds and ends.