Search results

For another 25k 🤣 So let me get this straight…. you know for a fact that the LC shown with the Bliss camper has this upgrade?

lol "facts" :ROFLMAO: FYI, actual specs of said 79 are here... And no, it is not rated for 3000lbs of payload, especially if it is a diesel. Let alone the likely 3500lb wet weight of that camper. A diesel single cab according to this sheet is rated for just 1060KG of payload. That's less...

Why you mad bro? :ROFLMAO:

Looks like its built well. But honestly, for 135k USD Id expect more. Or to be more clear.... Id expect LESS. Far less weight. A 2300# dry weight... and 55 gallon water capacity (another 500#) puts this box at near 3000#s before ANY gear or food is loaded. So a realistic wet loaded weight is...

That 300ZX on the list bring back memories. A buddy of mine had one, when I had my first gen 1989 SHO Taurus (hence the screen-name ;) ) What a hot mess of a fun car that was. Good times. :cool:

Our setup has two vents, like most factory tanks. One is primary filler neck vent the other is a tank (vapor) vent that connects to OEM vapor recovery line. I also installed a roll-over-valve on the tank (vapor) vent, so in the event of a rollover, fuel doesnt spill right into that line.

My 6.2 supeduty came with a 32 gallon tank, and rolling loaded with the camper just didnt give me the range I was willing to live with. Larger "direct fit" tanks hang WAY too low, and cost a small fortune. My solution was a second tank, mounted within the custom bed I built, giving me a total...

Or when you are above tree line, with nothing to suspend tarps from. Plenty of reasons why a tarp is essentially nonsense. Unless you are on a hobo-budget. Personally we backpack year round (even in the snow) with a 3-season Big Agnes Copper Spur UL2-person tent. Complete packed weight is just...

It can be hard to believe, but a tiny 6,000BTU propane furnace was enough to keep things comfortable (enough) even in that janky old uninsulated camper. The same BTU furnace in our custom camper can straight up cook us in temps down below zero. I keep the thermostat set to 65 or so. With two...

I say you must sort out your use-case, and balance it with desired comfort and budget. Sure, you could go with a TotalComposites setup, which is most excellent, or even a custom job like our setup, but do you actually need it? With occasional trips to Tahoe, depending upon stay duration, you...

It is great stuff. I applied it to our camper 4 years ago. It never sees the inside of a shop or garage, and zero fading or any issues of any kind. As for the tracker, I ran across this on FB a while back, and figured Id use it for inspiration. Figured something similar, a camo of some...

A few shots of todays Monstaliner treatment. Interior, entire front clip & firewall, and all 4 wheel wells received 2 heavy coats. The interior will be sparse. Door panels will go back in, and flush panels in the rear, and likely some good floor mats, but no carpet to speak of. So the heavy...

lol, right?! 🤣 Fortunately its a small rig. This is quite the project and I dont know if Id have it in me for a bigger vehicle!

We have tried essentially every glow/light/reflective collar on the market. These are what we use currently, and the best so far. www.amazon.com/Rechargeable-Collars-Cuttable-Necklace-Nighttime/dp/B07QXKJXDX?th=1

Productive morning. Officially the primer can me seam-sealed and/or top coated after 1-hour and up to 7 days without sanding. Ill give it 24hrs until its seam sealed, and plan on shooting the top coat (monstaliner) next friday. :cool:

We have two of these that run fill time when air quality is bad. They go a long way in reducing pollen within the house as well, which is great for us. https://www.honeywellstore.com/store/products/honeywell-50250-true-hepa-germ-fighting-allergen-reducer-air-purifier.htm

Ive even gone as far as fabricating a proper HEPA rated cabin filter for our superduty. Info here.... https://forum.expeditionportal.com/threads/custom-cabin-filter.237010/ Frankly, its the single best mod Ive done to this truck. For in camper filtration, we use this unit... Its small, quiet...

And about the dolly. Doing the math, after finishing up fabrication work on the body I realized I didnt have ANY way to get the body into the temporary shed that I use for sand blasting. So with some scraps I had, and a couple of large casters, I built a dolly. Then body was tossed into the...

And while we are at it... lets fix the broken primary blend door on the heater box yeah... 3d printer has already paid for itself. Certainly a purchase I should have done YEARS ago :rolleyes:

nearing completion of all metal fabrication, I realize that these silly clips are obsolete, and essentially none available in the country. These clips accept trim screws that hold the soft top trims in place. They are required, unless you ditch the trims and pony up for a hard top. I prefer...