Search results

extend tongue Here's how I did mine, you could weld instead of bolt, I removed the bed and cut out the front drain and welded a 2" plate over the hole' brian

If you have a couple thousand $ for RTT plus metal top=go for it, the base trailer looks Good. It a start, Just FYI=brian

these brake part # are for 3500 10" Dexter axle, each parts # is $ 173. each. just FYI

I just got a 3500# axle with E/brakes from southwest for my M416, they said out of stock on parking & E/brake, but the price was right for mine $290 olus shipping. I did check dexter axle price with both brakes was $490. shipped to calif. I like your trailer. good luck=brian

Thanks. I brought one=brian

where can I get a 3 way ratchet strap for my spare wheel?? thanks=brian

you could install the 60" bars and drill the hole thru into the bed and used carriage bolts from inside the bed down, just an idea.=brian

I like Fulton by Reese 1413040134 Jack, 1600 Lb, also has a wheel brake. selling around $150. .

check out this easy no weld extension, You may have to weld instead, I would not cut the mounts off and reweld. before you weld best to Assemble a drill a front hitch holes. just FYI=brian

spring Centers 39.250 and 57" for stock wheel back space offset. ck the back space on the FJ wheels. best price on e/brake axle is from SOUTHWEST trailer in Texas was $239.00 plus shipping. you get =Trailer Axle: 2 3/8" diameter x 3/16" nominal wall round tubing. Brake: 10" x 2 1/4" available in...

easy tongue extension check out this easy no weld extension, 48" bed to hitch. FYI=brian

How much sleeve overlap would I want to do? I would buy a piece about 1ft long, if you only need 6" more in width. Just FYI

cut the axle and slide a tube over it , will increase the width. just FYI

recommend Daystar airbag cradle Normally the Air Bag is one piece & attaches to the frame and springs as a unit, However when off roading sometime the rear wheel travel can be restricted by the length of the inflated airbag, I installed Daystar Air Bag Cradles which cycles Up & down on the...

Rock-Box check out RockBox trailer co, they have Steel and Alum lids/tops. =RBX ROCKBOX Offroad Aluminum Series Trailers are FINALLY HERE! Come take a look at 401 Victor way #3 Salinas, CA or call for pricing and more info: 831-261-8189! also see there thread .

happijac's are best I see no camper hold-down yet, I recommend Happi-jac. looks good on your Dodge. there are lots of rear camera's on EBay for a tie in to your dash unit, or just use the one off your tailgate. happy camping.=brian.

wireless back-up camera info Check out Ebay, I got mine wireless unit for $75.00, because I tow a M416 trailer which is small . Instead of wiring to the back-up lights, I wired it to a positive so I can see behind me all the time (How my trailer is towing).

I'm sure it will be OK. Last time out I had an overheating problem which I still have to fix. possible the water pump???

happi-jac install No bed stays, however you must remove the camper so you can get to the bed bulkhead. you will be happy with happi-jac.=brian

happijac's are best you can't go wrong with Happi-jac's, very safe. nice camper rig =enjoy.=brian