Search results

check out REDNECK-trailer.com Best prices in Calif. just FYI=btian

show us some pictures of your table mount???=brian

wiring location I look at mine and the black(pos) & white (neg) wires all terminate on the left side of the rear of the refrig compartment. may look for loose wires here.? just FYI=brian

Ck EBay for wireless back-up camera systems. I brought one= 5" monitor and camera $69.00. Instead of hooking up the camera to the back-up wires, just hook the wire to any positive at the back area. At the monitor I used a 12V aux plug into the outlet on dash. As a test I hooked the camera and...

Maybe you need a small light weigh trailer, I found the same problem =too much supplies, such as Honda 2K gen, LP bar bq, fire in a can,9x7 e z-up awning,tables, cook stove 2 burner,outside mats, ammo/targets ect-ect.=brian

I would use from etrailer=Hopkins 7-Way Molded Trailer Wire Connector - 11' Long. which would get you half way down the trailer, buy 8ft of each color wire from home depot to complete. to change to LED rear lights good from harbor freight. Hopkins Wiring code: HM20048 Price:$34.91 just FYI=brian

No need to replace the lights, just pop off the covers and ck the bulbs? could be the OP in replacing refrig cut the wire. open the refrig door ourside and ck wiring?. FYI=brian. You can check my posting for Mods.

For the clearance lights put the top up and check for power were the wires run up to the roof I think that is near refrig. and the wires run down inside the refrig vent. did the seller install the refrig? what brand /year truck?? =brian

I don't recommend X-lining the body, maybe the under the tub. It's hard to wash the dirt/mud off the x-line body, better to paint the body. just MO. I agree put it together a try a camping trip, this will give you ideas on wants/needs. =brian

Welcome to the Northstar family. let pictures roll.=brian

I purchase some seal off EBay, this vendor has lots of seals, You could send a pic to Northstar they may use the same seal?? here's a pic of mine. Just FYI=brian

It needs thicker aluminum on the sides and top, see the above plans for a stronger top, which weighs up to 58lbs. I just needed security and dry contents. Thanks for your interest=brian

can make a picture of the seal/gasket=My local RV supply has never seen a seal like the sample I gave them. tx=brian

Keep at it=good job. I have a wind-up roof by Heco/NorthStar and found a sail boat winch handle for $5.00 @ the swap meet and ordered a new modified gear assy from "Canvas Replacements" drilled out old sail boat nose piece and installed with drive pin the new gears. The new gears have a longer...

Quit looking, or buy a unit to handle a small camper.

Stan. most of your pics must be before the rain & snow , wind and cold weather. I think by most account it was more than weather was a bit rough. happy you enjoyed.

I recommend scissor steps at 36" like=

Jeff . check out post 1076 @http://www.expeditionportal.com/forum/threads/31599-Post-favorite-pics-of-your-rig-and-trailer/page108. keep up the good ideas=brian

Mike: nice idea on the step. I looked at a fold up step= http://www.discountramps.com/folding-hitch-step/p/HS-010-V2/ Just FYI=brian

Kerry & Doctorit. I think I'm sold on this, Seem to be solid and adjusts to many different configurations. Now to find the best price ? thanks for your input.=brian