Search results

ARB 47qt fridge in great condition with insulated ARB cover, I just purchased a 60qt combi $400 picked up in southwest virginia Zip 24315 text @ 5404197884

Price drop and pictures

This is the new style palomino made with composite panels it is loaded with all options, Has separate bath and shower, Electric leveling jacks, electric roof jacks, AC, and much more Used several times, I used it with my horse trailer but have now finished the trailer interior so this camper is...

Since it appears you are keeping the vehicle close to original, I would suggest upgrading your rear differential to a salisbury unit to get added bearing axle strength, rebuild both drive shaft with new high strength u joints, really consider upgrading your springs to parabolics since you are...

Prepped and coated the inside floor

Last of the paint prep

Frame painted Time to paint and reassemble

With the majority of the bits refitted it was time to dismantle for the last time, and begin prepping for paint. first a good power wash Evan boy helped too. frame was then painted with imron black

So this is the last of refitting the body, next we get to take it all apart, clean and paint the chassis & bits

preference too on grill placement some more fit up pictures

The refit of parts continues Picked up a brush guard looks ok need to make some adjustments

More seat box pictures with heater and drivers side

Fab & assembly of floor pan and seat box. We installed two heaters, one under the seat for Peeps and the other as a defrost unit

Engine position set with mounts tacked

Drive train location and install. Because I wanted to go back to the original series 2 set back breakfast/radiator support we had to shove the engine back. Since the transmission tunnel had been replace/refabricated for the ZF automatic this turned out to be not to bad. Of course new drive...

Repair pieces were fabricated as a matching hat section then a flat piece of sheet spot welded to the back, very stiff, after fitting joints were stitched welded a spacer was inserted between the skin and frame member before welding to avoid distortion of the skin. do not run long weld beads to...

Door bottom repairs

Finished underside of tub

So I always liked "Mercedes rover's" quad lights. So instead of another set of head lights we mounted Hellas. we also modified a Series III radiator support since that's what we had: We then checked the new radiator for fit