Search results

Just curious for those of you running either of the above OBD2 computers what kind of temps you are seeing? Cruising around town with ambient air temp mid 80's-low 90's I seem to be hanging in the 201-204 F range. Is this normal? Coolant level is good. thanks

Tried to figure out how to fix a P0705 code "Transmission Range Sensor " or shifter cable adjustment. Read a bunch online about cleaning or replacing that sensor as well as adjusting the shifter cable take up. Then I found a posting by someone that had the same problem did those items and then...

Put a multi meter on the circuit but I'm only getting 11.4 volts, shouldn't it light at least a little bit?

Programming remote. Well I finally got my remotes to program, had to have door closed as opposed to "CUCV". Also I had to hold down the led program button for around 30 seconds to enter programming mode, (makes me think I have a bad connection that is only contacting at certain points). While...

Been fixing a lot of little electrical lapses with Montero lately. Working on trying to figure out why only one reverse light works. Tried multiple bulbs, no difference. When I put the car in reverse and put a test light probe in the socket and attach the other side to the chassis I get a...

I looked but they didn't list my year gen or anything older only 99-2005 which I assumed would only fit a gen3.

Yep, I have the button, but pressing it didn't do anything. Followed the directions, I think. Got in the car inserted the key and turned to "on" position Doors were in unlocked but closed state. Press and held red led/button for 10-15 seconds, and nothing. No cycling of lock/unlock. Am I...

Yep, that is what my remote looks like, but like Eric M, I don't believe the light is a button, just a little red light.? I'll have to check when I get home.

Thanks @ tlr I'll try there, wonder why the FSM lists it in the back? Weird stuff.

Nope, pulled everything a part again. Nothing in that area. Really at a loss to determine where that module is. :Wow1: Time to move on to another task.

So originally got my car with only one remote. Ordered another through ebay and wanted to program it. Originally I assumed the keyless entry module would be under the dash on the driver side directions mentioned finding the module and press the button on it to allow programming. Seemed simple...

programming remotes, or maybe not. So originally got my car with only one remote. Ordered another through ebay and wanted to program it. Originally I assumed the keyless entry module would be under the dash on the driver side directions mentioned finding the module and press the button on it...

attempted to program a new remote So originally got my car with only one remote. Ordered another through ebay and wanted to program it. Originally I assumed the keyless entry module would be under the dash on the driver side directions mentioned finding the module and press the button on it to...

This guy has posted on other sites (I think FJ forum), where he was banned eventually. May be wrong but I believe he made threatening statements to more than a couple members. New generation Internet Troll?

I thought it was supposed to be under the dash? I bought a replacement key fob just haven't programmed. Where was your module in the cargo area? thanks

Getting hot air out of the engine bay would be my guess. Plenty of flow through the grill. Need to keep that air moving out?

x2 for Cliff, super honest and good rates.

thanks jhill15, I thought about that, but it seemed too simple to work I'll give it a shot.

Not to highjack the thread, but it there a way to split and if so which set of outputs to add a sub woofer. I recently replaced my factory infinity system with a an aftermarket deck with the required two sets of preamp outputs. I have a powered/subwoofer sitting on a shelf in the garage but it...

2nd on tuning with SWR meter. The one on my 4runner would receive fine, but couldn't transmit worth a darn until I tuned it. Think I paid less than $20 on amazon for the meter