Search results

Mounted the mufflers first today: Also the lights: Then i reworked the clutch cable: Cleaned up the wiring and stuff: Mounted the chain tensioner: Mounted a hitch and a shackle to fit future trailers:

Started building the height adjustment for the handlebars: Finished: Then i fabricated the mount for the handlebars: And mocked up the mufflers:

Shortened the chains: okks like the exhaust still fits: Thought about the tank position: Mocked up a frame: Front tank mount: Mocked up the handlebars: I`m absolutely lucky, all wires are long enough. After two hours the wiring doesnt lokk that bad anymore, does it? Also...

Started with the track tensioners today by drilling some flat: Turned the spindles: Everything together: Tacked in: Put the exhaust back on the engine. Broke the second one off when i was trying to get it off the collector Ordered two harley ones... Then i started with the upper...

Should be running by next week... :smiley_drive: The chain drive didn`t work out like i thought it would, so i had to remove the sprocket flange: Then i reused a sprocket i had laying around from the Hägglund: Then i changed the rear axle mount for the brake caliper: MAde a mount...

Thanks guys, i think it should be driving next week... Started building the drive axle today. First i turned it down ... ...to fit all the flanges: Welded them on: Turned it to the final dimensions... Fit`s: Then i turned the flange for the brake disc: Fit`s: Flipped it...

Started building the flange for the chain sprocket: Then i milled out a disc: Finished: Put it on the lathe: Finished: Then i started with the front axle by welding the fixed frive sprocket on it: And turned it down: Dialed in the tailstock: Front axle finished: Also...

Hi guys, have been forced to post this project on Expo too, so here it is: It`ll be similar to this unit: 3.2 The difference is that my version will have a lot more power and i`m planning on going up to 50mph. Tracks will be build similar to my Mini Hägglund, power will be delivered by a 24...

Well i think it`s not much expo related, but if you guys want i can start a thread over here too... :smiley_drive:

Machined the second bolt: Got the two missing rams: Put the Hägglund on hold until the Motodog is finished: http://www.pirate4x4.com/forum/expedition-vehicles/1286833-motodog.html

Put the 3 jaw back in the lathe: This piece of 1.2713 (203052psi) will be used for the four ram mounting bolts: Turned it down: And put some threads on it: Fits: Put it in the mill: First one finished:

Finished the second ram mount today:

Cut the missing threads: Made some room for the hose connection: Fits: And started with the second one:

Well, unfortunately this road was closed so i`m not allowed to go up there with a motorized vehicle any more... But i`m going to start a side project that helps me get up there in the snow soon... :smiley_drive:

No i don`t, i just wan`t to get it running. I can think about that when i built the next one. But, it`s not as heavy as it looks and i doubt it`ll see much snow... Continued working on the ram mount: Bored it out: Flipped it around: Precut some threads: And finished them:

Decided to build the hydraulic ram mounts first. So i cut a piece of steel: And put the four jaw chuck in the lathe and started boring it out:

Had to pause the hydraulic pump mount today because i need to place the alternator first: So i started with the new articualted join. The mount is the only thing that will be used from the old one: I need to cut a M75x2,5 thread in a 60cm long tube. In order to do this i need a big enough...

Picked up the steering rams today:

It`s coming together:

Started building the hydraulic pump mount today: