Search results

we move forward slowly

I don't have that information, but you can try to request it, send him an email

here in Spain in 3mm steel for less than 3000 euros you can't get anything, I would rule out duralumin for a defense

Hi privately it won't let me send files, send me an email and I'll attach it to you

There is no problem, the manufacturer works with certifications in hand.

They are manufactured for more than 6500kg, that is enough for me and the engineer,at the moment I have not yet approved it and I don't know if I need any manufacturer's information, etc. They have been manufactured according to European E.T.R.T.O. regulations. With which They will comply with...

I have no idea, but I understand that it is not valid for a vehicle with more than 6500kg

https://tejwheels.com/ They only make them in 10" width, they speak Spanish.

from Spain Seville

It's too late . but today if I had to repeat it I would do it with an aluminum structural profile and reduce the weight.....but as I say it is too late.

For a subframe I won't even tell you, not even a welding workshop is worth it, it has to be manufactured and approved by a second-rate bodybuilder with the appropriate permits from Mercedes.

How lucky....here in Spain you can't move a single screw without an engineer involved.

We have not weighed it, but the Fuso in the photo with cell is around 5200/5300 with full tanks, we share the same chassis.

hat entire area is full

hot dipped galvanized subframe

Thanks to everything, you learn the positive things, bugs like this go down to Africa, and they go up without problems. I haven't seen a bar of these games yet. If you look closely you will see that the underride bar is foldable for when you are off road Greetings.

the compi's wheel carrier

The more possible the better, this is a friend's with an angle slightly above 30º, the box is a little shorter, mine is going to be slightly below 30º

This truck is perfectly valid for 4x4 use, but some minimum angles must be respected, this rule is as important as the one you point out regarding weight distribution, thanks for the clarification