jscherb
Expedition Leader
He didn't say, but if you look at the second photo you can see a logo embossed into the can - it's a Dinuba stainless steel water can: http://dinubawater.com/product/jerry-can/
Barn Door for JK factory hardtops
- Thread starter jscherb
- Start date
He didn't say, but if you look at the second photo you can see a logo embossed into the can - it's a Dinuba stainless steel water can: http://dinubawater.com/product/jerry-can/
YankeeSailor
New member
Any moron can hang a jerry can on a vehicle. The stickers, however, are a sign of genius.
Sent from my XT1254 using Tapatalk
jscherb
Expedition Leader
The side mount jerry can carriers he's installed are made by MORryde, maybe they should be called MORONryde instead? :Wow1:
(Sorry, couldn't resist
).
unkamonkey
Explorer
At least I got a laugh out of this but I do have a decidedly bent sense of humor.
jscherb
Expedition Leader
In this photo the fridge is on the first extension and the drawer pulls out from under the fridge on the second extension
The swivel could be mounted under the fridge at this location so it can swivel to the side, the end that swivels will end up a bit in front of the tail light.
The swivel could be mounted under the fridge at this location so it can swivel to the side, the end that swivels will end up a bit in front of the tail light.
crusaderJK
Adventurer
I power my Waeco/Dometic 35qt with a 75Ah gel battery that's getting charge from an 80W solar panel. Works pretty well. If necessary the battery can power the fridge for up to 5 days without sunlight.
crusaderJK
Adventurer
It's just a cheap no-brand made in china battery that came with the solar power kit.
When it dies, I will replace it with another cheap solar battery, because that's what they're made for. No need for high CCA, just deep-cycle.
jscherb
Expedition Leader
I'm working on two design ideas for a slide-deployable kitchen.
This first idea has a two-part folding table. The table folds vertically against the fridge; when it's folded down the second section flips forward to provide a fairly large table. This concept drawing shows the sequence of stowing the kitchen:
The table would be large enough to provide for a small stove plus a work surface, as well as providing full use of the drawer that slides out from under the fridge.
In this next idea, the fridge is mounted on a swivel, and swivels to the side. The drawer can slide closed under the table so it doesn't get in the way when you're working at the table. This shows the sequence of deployment:
There would be room for a stove with this option as well.
This first idea has a two-part folding table. The table folds vertically against the fridge; when it's folded down the second section flips forward to provide a fairly large table. This concept drawing shows the sequence of stowing the kitchen:
The table would be large enough to provide for a small stove plus a work surface, as well as providing full use of the drawer that slides out from under the fridge.
In this next idea, the fridge is mounted on a swivel, and swivels to the side. The drawer can slide closed under the table so it doesn't get in the way when you're working at the table. This shows the sequence of deployment:
There would be room for a stove with this option as well.
Looking forward to seeing what you do with the swivel and fridge.
Got a question for you about the 2 door window sliders. Im picking up my new raft tomorrow and this is the rack I picked up for it, Rhino-Rack 2 Door
Here is a pic of the inside structure of the rack.
Do see anything that would interfere with the sliding window kit?
Got a question for you about the 2 door window sliders. Im picking up my new raft tomorrow and this is the rack I picked up for it, Rhino-Rack 2 Door
Here is a pic of the inside structure of the rack.
Do see anything that would interfere with the sliding window kit?
Last edited:
jscherb
Expedition Leader
Looking forward to seeing what you do with the swivel and fridge.
Got a question for you about the 2 door window sliders. Im picking up my new raft tomorrow and this is the rack I picked up for it, Rhino-Rack 2 Door
Here is a pic of the inside structure of the rack.
Do see anything that would interfere with the sliding window kit?
No, the Rhino Rack structure won't interfere with the slider window kit. Here's a photo of the inside of the JKU slider window; the 2dr will look the same.
Update on the 2dr slider kit: The first thing on my to-do list when I get home form this trip the middle of next week is to send a prototype 2dr retrofit kit to the hardware manufacturer so they can do the production engineering to get the kit into production. I'll post updates as that kit progresses towards production.
Last edited:
Similar threads
