CoastalDefender
Explorer
You are a bad bad man, with a bad bad truck.Creek said:
ROFSheriffHL:
Creek's Xterra Build Thread
- Thread starter Creek
- Start date
ROFSheriffHL:
CoastalDefender
Explorer
Tires look much better. Maybe it was the angle or something?Creek said:the last pics I took are what's already posted. I haven't taken any other pics except for this one this morning...
I'm heading to Cali tomorrow morning and wheelin all weekend. PLENTY of pics from that will be posted...it'll be the first testing of the new setup
Creek
Adventurer
went out to Moab last weekend - Wipeout Hill
http://video.google.com/videoplay?docid=9013267994659065343&hl=en
and a vid my buddy Sean put together from the trip
http://video.google.com/videoplay?docid=7885919419597025055&hl=en
http://video.google.com/videoplay?docid=9013267994659065343&hl=en
and a vid my buddy Sean put together from the trip
http://video.google.com/videoplay?docid=7885919419597025055&hl=en
Last edited:
CoastalDefender
Explorer
This video is currently not available, please try again.Creek said:
Creek
Adventurer
newest mod
It's been a while...
So, when I got a second dog (Brownie), I needed to free up the rear cargo area. I used to have my Engel back there and there was enough room for 1 dog, but not 2. Also, I NEVER have my back seats in. They have a permanent home on the shelf in my garage. I've been contemplating how I could go about mounting the Engel in the back seat area and today, I got off my lazy MMMMM and just started messing around with some plywood and 2x4's. I made a pretty sweet little shelf for the Engel. And, I can still put in the smaller split section of the rear seat if I need to carry more than 1 passenger.
First, I removed the 2 forward back-seat attachment points on the drivers side (where the seat clips in). I also removed the seatbelt recievers for the driver and middle rear seats (1 bolt). I secured the shelf using new hardware in the existing bolt holes. I also added eye hooks to the forward facing section of the shelf for tie down points. For rear tie down points, I'll use the existing tie downs in the seat back portion (usually used for car seat attachment points). I still have to sand down the edges and give it a coat of bedliner (I have a few xtra cans sitting in the garage). But, for now, here's some pics.
Rear bolt
Eye Hooks and 1 of the forward bolts - the other is under the Engel slide lock
Finished product. Sprayed with some Duplicolor Bedliner.
With the fridge in (not strapped down)
And, yes - it's fully opens with about an inch to spare. I could not open it all the way with it in the cargo area - bonus!
It's been a while...
So, when I got a second dog (Brownie), I needed to free up the rear cargo area. I used to have my Engel back there and there was enough room for 1 dog, but not 2. Also, I NEVER have my back seats in. They have a permanent home on the shelf in my garage. I've been contemplating how I could go about mounting the Engel in the back seat area and today, I got off my lazy MMMMM and just started messing around with some plywood and 2x4's. I made a pretty sweet little shelf for the Engel. And, I can still put in the smaller split section of the rear seat if I need to carry more than 1 passenger.
First, I removed the 2 forward back-seat attachment points on the drivers side (where the seat clips in). I also removed the seatbelt recievers for the driver and middle rear seats (1 bolt). I secured the shelf using new hardware in the existing bolt holes. I also added eye hooks to the forward facing section of the shelf for tie down points. For rear tie down points, I'll use the existing tie downs in the seat back portion (usually used for car seat attachment points). I still have to sand down the edges and give it a coat of bedliner (I have a few xtra cans sitting in the garage). But, for now, here's some pics.
Rear bolt
Eye Hooks and 1 of the forward bolts - the other is under the Engel slide lock
Finished product. Sprayed with some Duplicolor Bedliner.
With the fridge in (not strapped down)
And, yes - it's fully opens with about an inch to spare. I could not open it all the way with it in the cargo area - bonus!
Similar threads
