On EBay 1993 Mercedes Puch 230GE High Roof Camper 34k miles $27,5k

[Joe917]

How thick is the shell? insulated?

 

[NOFOMO]

I found this write up for an A/C retrofit from Nostalgic A/C. Sure that this is just one of several options:

1984 230GE W460, New Heat and A/C Project

www.benzworld.org

 

[NOFOMO]

@Joe917 the shell is very solid and seems to insulated. Probably a two layer shell with a layer of air in between.

 

[AndyBobby]

I'd suggest going on a long cruise and watching the meter to get an idea of the fuel economy, or at least tracking miles/kilos between tank fills would go a long way for a potential buyer. Most buyers want some idea of what they are signing up for fuel economy wise. It's not that low mpgs would deter me personally, I just want to know what I'd be signing up for! And it would be very easy on your part to provide this test. Very cool vehicle... I'm rolling over its potential in my mind. What is the overall height?

 

[mk216v]

@Joe917 the shell is very solid and seems to insulated. Probably a two layer shell with a layer of air in between.

Dimension?

PS--someone buy this and stuff an OM603A or 606A....or a VW 1.9L TDi into it!

 

[NOFOMO]

@AndyBobby the overall height of the G with the hardtop is about 93 inches.

@mk216v there are some pictures in the Flikr album with inside measurements. The inside of the shell measures about 68 inches to where it meets the rollbar. Not sure about the length of the alcoven. I’m in Tampa right now and the G is parked back in PA.

 

[mk216v]

@AndyBobby the overall height of the G with the hardtop is about 93 inches.

@mk216v there are some pictures in the Flikr album with inside measurements. The inside of the shell measures about 68 inches to where it meets the rollbar. Not sure about the length of the alcoven. I’m in Tampa right now and the G is parked back in PA.

I meant thickness of cabin structure for Joe917.

 

[NOFOMO]

@mk216v the thickness of the hardtop shell is about 1 1/5 inches at the bottom and 1/2 inch at the top.

 

[mk216v]

@mk216v the thickness of the hardtop shell is about 1 1/5 inches at the bottom and 1/2 inch at the top.

Thx. Joe917 was also looking for <side> wall thickness.

 

[NOFOMO]

Just listed the GWagon on EBay.
That’ll get things moving again….?

 

[Dendy Jarrett]

Please list a location per the forum rules - I realize you may be on the road, but at least a region.

 

[NOFOMO]

@Dendy Jarrett The vehicle is currently located in Eastern Pennsylvania, about 45 minutes west of Philadelphia.

I have also added this information to the original post.

 

[mk216v]

Just listed the GWagon on EBay.
That’ll get things moving again….?

How about a link for the lazy?

 

[NOFOMO]

@mk216v glad to oblige, but the readers of this thread are already most informed! ?

1993 Mercedes-Benz G-Class | eBay

Find many great new & used options and get the best deals for 1993 Mercedes-Benz G-Class at the best online prices at eBay! Free shipping for many products!

www.ebay.com

 

[mk216v]

@mk216v glad to oblige, but the readers of this thread are already most informed! ?

1993 Mercedes-Benz G-Class | eBay

Find many great new & used options and get the best deals for 1993 Mercedes-Benz G-Class at the best online prices at eBay! Free shipping for many products!

www.ebay.com

Thx. I guess everyone else is psychic?
Sorry it didn't sell here; https://bringatrailer.com/listing/1993-puch-230-ge-overlander/
PS--back to Joe917 question, what's the camper wall thickness?