OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!
- Thread starter aaaslayer
- Start date
dirtnsmores
Member
I would also like to see those pics!
Finished up the ceiling insulation and Coroplast panels. Total of 1.5” of rigid foam. Outside bays got a little less taking into account the thickness of the Coroplast on the outside edge. I wanted it to be flush with the bottom of the aluminum. It all turned out decent and no moisture absorbing materials which was the main goal. All easy to clean materials as well
Attachments
Last edited:
bonuscup
New member
Super simple, just goes right above the barn doors. Haven’t yet had it in wet weather so I can’t comment on the effectiveness yet.
Fergie
Expedition Leader
In case you didn't know, there are now latch covers available from OVRLND.
The stock latch and gasket....the gasket is replaced w the cover assembly.
Installed:
And the actual function test:
You can them here:
campovrlnd.com
The stock latch and gasket....the gasket is replaced w the cover assembly.
Installed:
And the actual function test:
You can them here:
Latch Covers (Pair)
SHIPPING MID-OCTOBER 2024 Retrofittable to any OVRLND camper! These covers replace the rubber gasket around the latch and provide a snug, water/dust tight fit and easy installation. Latches are sold in pairs ($15/pair) and work on all barn doors, rear hatches, and side hatches.
campovrlnd.com
Any Tacoma owners out there have this installed for battery or other storage. Seems like a great solution for bed space. Tacoma 05-23 bedside storage / battery relocation boxes.
dstefan
Well-known member
I like these! Do they snap pretty tightly and do you think they’ll stay in place at highway speeds?In case you didn't know, there are now latch covers available from OVRLND.
The stock latch and gasket....the gasket is replaced w the cover assembly.
Installed:
And the actual function test:
You can them here:
Latch Covers (Pair)
SHIPPING MID-OCTOBER 2024 Retrofittable to any OVRLND camper! These covers replace the rubber gasket around the latch and provide a snug, water/dust tight fit and easy installation. Latches are sold in pairs ($15/pair) and work on all barn doors, rear hatches, and side hatches.
Fergie
Expedition Leader
Very tightly....even w only three corners on, they dont come lose at highway speeds. Be aware that in cold weather, they take some force to get off the first time
dstefan
Well-known member
I should expect no less from Jay . . . I’m ashamed I even asked!😞🤣
OVRLND Campers
Active member
I messed up and will be sending out new ones!
I was so focused on keeping water out, that I forgot to test for actual freezing! Dumb. The original material I used worked for both water and freezing, but then I stupidly switched to a material I thought would have better UV properties, and didn't retest for freezing. The material I landed on said it had a "transitional glass" temp of -11F but this stuff turns rock hard at 0 deg, making them nearly impossible to open.
SO I have redesigned to make them click into place easier, I have found a new material, and will be resending out a couple hundred! I landed on a like material that advertises UV properties as well , that is softer and opens when I put it in the freezer at -3F. Still difficult to open, yes, but unlike the other one it will actually open in these conditions.
@Fergie Ill have new ones for you and your mom in the next week or so.
@dstefan You don't need these anyway.... I think Phoenix is still 1000F.
dstefan
Well-known member
Jay, true, but that’s only 537.778°C and our lows here in Baja Flag have now reached 995°F, so we have that going for us!😖😁. And what’s this ”freezing”thing you mentioned …🤔?@dstefan You don't need these anyway.... I think Phoenix is still 1000F.
That said, still think they’d be useful on the rear doors for dust control, so I’ll probably order some in the near future
On my camper, the water that comes off the roof from either rain or melting snow runs down the struts and drips on my tailgate when open or on the top of the tailgate when closed. With the water going down the struts, it would never hit the drip channel if I installed them above the barn doors.
Interested to hear your experiences when you get into some weather with this placement of the drip channel.
My plan for this winter is to place these same drip channels on the roof right at the back of the camper with the hope that the water will be diverted to the sides of the camper and not down the struts onto my tailgate.
K9LTW
Active member
100% this. I put some 1/2" drip rail on and...well...that was useless! We have full barn doors, and it would just run right into the door/down the inside of it. I then bought an awning gutter to fill the space when our 270 is deployed and now have a dry entrance and exit from the truck so long as the awning is out.
Double Down
New member
@dstefan Do you have any more pics of how you mounted this to the camper itself? Or of the exhaust fitting on the exterior?
I want to do this on my OVRLND, just trying to get a better idea of what it takes.
