Post your Mitsubishi Pajero Pics

[KIRK!]

Coming along...

 

[grandpa]

Coming along...

Looks good. Is that a step on the back? If so what kind and how is it mounted?

 

[KIRK!]

I assume a Dealer accessory. It's cast aluminum and "Pajero" is molded into it. The way it's constructed and mounted, it must be a Mitsubishi piece. I'll get pics of it. It's very handy, but causes a little loss in clearance as you can make out in the above pic (you can see the tubular steel mount.

 

[Glenn C]

This be mine , 96 JDM 2.8 TD Auto , i blame James W (white SWB on page 47 of this thread for my new found love of pajeros)

 

[SoCalMonty]

Isham Canyon, Panamint Valley, CA...2005 I think...'89 LWB:






John Bull Trail, Big Bear, CA...2005 ish:

 

[jethrooo]

hey fellas! im new to this forum.
but heres my 1996 montero ls project.

 

[KarmannMarco]

Here's my 97 LS I bought two months ago. Completely stock as of now but I plan on a 2 inch lift , 33s and a few more goodies soon. The topcenter portion of the hood and the roof have badly burned clearcoat. I plan on doing a " Discovery Camel " paint scheme on the hood to cover the bad paint and probably leave the roof be as I plan on building a roofrack. I'm also trying to decide whether to remove the plastic side moulding (and figure out how to fill the many holes) or paint the moulding black ( which would match the hood well ). The running boards are already off.... This is going to be our family vacation rig and my daily driver. Being new to the offroad world I'm quite excited.

 

[LaOutbackTrail]

You won't need much to fit 33s. I've got 33x12.50s on stock wheels, and I FINALLY cranked the torsion bars after putting an ARB on the front. I added Old Man Emu coil springs in the back to compensate for the heavy loads I carry. Sits nicely now with zero rubbing in offroad environments. If I were you, I'd bypass the 12.50 width tires and fit a set of 33x10.50 BFGs (AT or MT, either are a good choice). Be sure to get a full size spare since you have a center differential. If you ever blow a tire in 4wd CDL, you'll need to have the same height tires.

Looks good. i dig the red-ish color. A blacked out hood would look nice, be sure to sand off as much of the clear coat as possible, prime then paint. Or, sand off the pealing clear coat (but leave paint in tact) and use black vinyl. I may go that route at some point, but its not a priority.

 

[KarmannMarco]

Thanks man. 33 x 10.5 sure does sound better. And a thinner tire looks better in my opinion.

 

[Tim.plante]

You have the same exact truck i have and the black and red hood looks good..havnt got to painting the trim yet but i plan on doing a rhino lining and let the black "complement the hood" to quote my wife..got the rear and frony bumpers off looking for a good one to put on cant wait to see what you do with yours

 

[lordtrunks]

89 V6 Tray back dana 300 transfer case 37's bfg baja t\a's on military rims locked front and rear

 

[94monster]

Pics of my 94 post 2-inch body lift with modified stock bumper and fenders also have two inch iron man suspension lift and 33x10.50's

 

[Glenn C]

heres mine on a little roaad trip for my girlfriends birthday shot with a camera phone so not great

The Red head is the misses

 

[eurosonic]

Pics of my 94 post 2-inch body lift with modified stock bumper and fenders also have two inch iron man suspension lift and 33x10.50's View attachment 130316View attachment 130317

sweet monty..

How do you like the Ironman kit? Im thinking of getting that as well.

 

[nwoods]

The Red head is the misses

Pretty girl and nice rig, but you don't get to call her the misses until she's the wife and not the "gf"