Are the o2 sensors the same on a 95 as a 96? I get intermittent check engine codes from failing o2 sensors? interested in selling them if they are the same 95 vs 96 D1?
For you guys doing the top bellhousing bolts... the easy way is to remove the rubber engine mounts, lower the engine in the chassis, and get them from the top
This goes for D1 and D2
For you guys doing the top bellhousing bolts... the easy way is to remove the rubber engine mounts, lower the engine in the chassis, and get them from the top
This goes for D1 and D2
Pretty easy that way but it's even easier to undo the transfer case to frame bolts, lower it and the trans down a bit and get them through the access plate on the trans tunnel inside. If I were doing a complete engine/trans swap like this one that's what I would do.