sierrahsky
Adventurer
Well I finally FINISHED!! In reality it would not have taken me so long but I lost a day of work due to shops not being open and since I have never done anything like this before the process was very slow. I also changed my design about 3 times in the process.
Originally I was going to do a full custom box, but we decided if at any time we needed to remove the fridge and put the seats back that it would be a complete pita. Then We found that because we are adding a sub woofer box that we would run out of room if we did a full platform and enclosure. In the end we decided on the most simple design and sturdy. 3/4 Square .120 steel with an oak top, bolted in and reinforced. All though its not really much to look at its FUNCTIONAL and SIMPLE. The 2 things I wanted most.
Here are a few finished photos.
Originally I was going to do a full custom box, but we decided if at any time we needed to remove the fridge and put the seats back that it would be a complete pita. Then We found that because we are adding a sub woofer box that we would run out of room if we did a full platform and enclosure. In the end we decided on the most simple design and sturdy. 3/4 Square .120 steel with an oak top, bolted in and reinforced. All though its not really much to look at its FUNCTIONAL and SIMPLE. The 2 things I wanted most.
Here are a few finished photos.

