Trailscape's 06 Tundra
- Thread starter trailscape
- Start date
trailscape
Explorer
Thanks. It looked good plain, but I was bored one afternoon and it was a fun project. That aluminum can manage a decent shine if you want it to with some high grit wet sanding and a good polish.
I'm trying to decide how I want to paint the roof rack now. I imagine black bedliner spray would probably work best and be the easiest route, but I could also color match it or even keep it a raw finish.
I'm trying to decide how I want to paint the roof rack now. I imagine black bedliner spray would probably work best and be the easiest route, but I could also color match it or even keep it a raw finish.
Kpack
Adventurer
I'm partial to black personally. Simple and utilitarian.
How did you go about modding your grille? I've always been interested in doing a mesh grille like that, but haven't come across too many write ups about it.
trailscape
Explorer
I think this video is the best how-to I've seen done.
I think most have reused pieces to fill the holes after the cut. I didn't use the the stuff he used in the video, but I might try that next time.
I think most have reused pieces to fill the holes after the cut. I didn't use the the stuff he used in the video, but I might try that next time.
toyotech
Expedition Leader
STEEL IT comes in black now if you don’t want to powdercoat
Sent from my iPhone using Tapatalk
trailscape
Explorer
I'll check around for some coating estimates. After how many times I've had to respray the grille mesh, I'm not sure how well aerosol would hold up on the rack.
Have you had one powdercoated? I'd be interested in a ballpark figure. Think one or two cans of Steel It would be enough?
Have you had one powdercoated? I'd be interested in a ballpark figure. Think one or two cans of Steel It would be enough?
trailscape
Explorer
Starting another cleanup, upgrade of my auxiliary wiring. This panel allows me to disconnect the rear battery from the engine or to disable battery power entirely. The solar has a disconnect higher up.
I also reinstalled the solar panel on my roof as I realized a new layout allows another 100w panel on the other side of the vent fan by a fortunate 3/16ths margin.
I also reinstalled the solar panel on my roof as I realized a new layout allows another 100w panel on the other side of the vent fan by a fortunate 3/16ths margin.
trailscape
Explorer
I've been slacking here a bit, so here's a couple updates. I got the roof rack installed. I haven't settled on lighting, but I like this arrangement for the moment. I removed the NMO mount and installed a marine wire gland to route wires. Seemed the easiest method as I never got around to using the NMO for anything.
Also picked up a Rough Country switch control. I actually mounted it in the storage area under the rear seat.
The case and switch panel are built like a tank, but I'm not a fan of the actual switches as I can't see an easy way to label or identify each one.
Other things in the works.
Still a lot left to to do getting it ready for the summer.
Also picked up a Rough Country switch control. I actually mounted it in the storage area under the rear seat.
The case and switch panel are built like a tank, but I'm not a fan of the actual switches as I can't see an easy way to label or identify each one.
Other things in the works.
- Installed a double cab/sequoia dome light panel. I don't really recommend that option as I had to really modify it to fit, but it's in now.
- Picked up a Rostra Rearsight LCD monitor/camera kit to replace my rearview mirror. Also found a nice camera I mounted on the passenger side of the rack for additional coverage when needed.
- New lower ball joints installed not two and half years later. All oem this time..
Still a lot left to to do getting it ready for the summer.
trailscape
Explorer
I have a tolerate/hate relationship with the fender flares..
They were originally white, but were so pitted I sanded them down and coated them with bedliner spray and black paint. I've had to redo them every year or so as the paint tends to fade.
I'm preparing to paint them again, this time I'm going to use some Spraymax 2k clearcoat.
It's how bulky they are that bugs me most. Without them, my tires sit about flush with the body and gives it a clean look. I almost want to attempt to trim them down a couple inches.
Photos comparing present to last summer. You can also see how I relocated the solar panel.
They were originally white, but were so pitted I sanded them down and coated them with bedliner spray and black paint. I've had to redo them every year or so as the paint tends to fade.
I'm preparing to paint them again, this time I'm going to use some Spraymax 2k clearcoat.
It's how bulky they are that bugs me most. Without them, my tires sit about flush with the body and gives it a clean look. I almost want to attempt to trim them down a couple inches.
Photos comparing present to last summer. You can also see how I relocated the solar panel.
trailscape
Explorer
Thanks. I have a pile of lights and I'm trying to settle on what to use for the rack. Might try two 10" bars with a 6" spot in the middle.
I removed the bug guard for a long time as I didn't like the look anymore. I almost tossed it before trying the paint. Now, it's grown on me.
I removed the bug guard for a long time as I didn't like the look anymore. I almost tossed it before trying the paint. Now, it's grown on me.
trailscape
Explorer
Yeah.. I need to figure out something better with those. I may just pull the harness from it and wire it to the rocker panel I was using in the overhead console.
I should have gone with the version that used standard rocker switches, but this was a deal at the time.
I saw some toggle switch bezels on ebay that can be custom printed. Might also give that a shot.
I should have gone with the version that used standard rocker switches, but this was a deal at the time.
I saw some toggle switch bezels on ebay that can be custom printed. Might also give that a shot.
trailscape
Explorer
Between the roof rack and the new skidplate, I do love the occasion of adding some functional art to the truck.
Similar threads
