UJOR Build Thread
- Thread starter ujoint
- Start date
ujoint
Supporting Sponsor
It has the RSC upgrade that uses Dynatrac knuckles. I'm not sure of the pitch. If you want a straight tie rod for the 99-04 axle, the trac bar bracket will have to be removed for clearance.
Sheep Shagger
Adventurer
And here's a teaser, what we've been working on today.....
Come on, it's been a week, you can't keep us waiting this long.
sdski
Observer
I just noticed that the 10.5" you are building has both calipers on the rear of the axle, my 10.5 has one on the front, one on the rear. I also happened to notice the other day when browsing ScoutKid's thread that his 10.5" had a flanged output, whereas mine has a yoke. Whats with all the differences? Do you have any preference with any of the changes? Do you know what years/engine configurations got what axles?
A quick google search tells me that the calipers on different sides might have only been in the 99 model year, though I thought the axle I got was from a newer truck...
A quick google search tells me that the calipers on different sides might have only been in the 99 model year, though I thought the axle I got was from a newer truck...
ujoint
Supporting Sponsor
Correct, you have a 99 axle.
ujoint
Supporting Sponsor
Come on, it's been a week, you can't keep us waiting this long.
I know!!!!! The truth is that I've been so busy I haven't touched them. Unfortunately, my toys/projects come last! I hope to have a little bit of time later this week or over the weekend to finish them up & get them to powder coat.
ujoint
Supporting Sponsor
The SMB is done, and left the shop yesterday. Drives great! Here are the specs: 06 E350 6.0 SMB, UJOR 4" conversion with all the goodies. American Racing Wheels, BFG AT KO's, Bilstein shocks, and we also made some engine mods. Say goodbye to the EGR cooler & we installed a new engine programmer. That will help this 6.0 get down the road a little quicker & more efficient.
ujoint
Supporting Sponsor
No T/F tank, stock unit.
ujoint
Supporting Sponsor
Here's something that we all need for our desk 
I just had these made up for the holidays, neat little holder for envelopes/etc. These little things are stout! I have limited #'s, and they're split between black & green powder coat. Get em before I run out!!!!!
(I only have 14 total of the Jeeps)
$25 to your door for ExPo members.
Here's a pic with some stickers to show the scale
I just had these made up for the holidays, neat little holder for envelopes/etc. These little things are stout! I have limited #'s, and they're split between black & green powder coat. Get em before I run out!!!!!
(I only have 14 total of the Jeeps)
$25 to your door for ExPo members.
Here's a pic with some stickers to show the scale
clcoyle
Explorer
Here's something that we all need for our desk
I just had these made up for the holidays, neat little holder for envelopes/etc. These little things are stout! I have limited #'s, and they're split between black & green powder coat. Get em before I run out!!!!!
(I only have 14 total of the Jeeps)
$25 to your door for ExPo members.
Here's a pic with some stickers to show the scale
Very Cool designs.
