What did you do to your Full Size today?

[Luckychase5]

Got the big girl weighed, 7,080 lbs unloaded with my wife and I inside. Not bad

 

[IdaSHO]

Considering your max GVWR is 8800 lbs, it isnt great

 

[jdinevens]

its not bad considering what I've seen the fords weigh....1720 of available payload is certainly better than the 400 or so I've got =) Although the weight shedding will be coming...

 

[IdaSHO]

yeah, crew cab owns you.

 

[Luckychase5]

Considering your max GVWR is 8800 lbs, it isnt great

True true, but hopefully the airbags help with the rear end at least

 

[FlatlinesUp]

No pics, but replaced the rear screens in my camper shell. Not a big job, but a moderate pita if using crappy tools.
If you plan on doing it, I suggest using a "good" bead rolling tool, not a cheap one (I thought I was only going to use it once, so don't spend the extra $)
AND: get beading from a camper supply. Beading from Lowes/HomeDepot was .120/.125, and the old beading was prob actually .110 or so. It would have made it a 30 min job instead of 1.5 hours and hand cramps.

It is nice to have them done though.

 

[jdinevens]

yeah, crew cab owns you.

Yes.....=(

 

[pappawheely]

Pulled the whole damn steering box out when I could not get the pitman arm off. I guess I should tap it for ram assist now. The good news is the rag joint looks good.

 

[AFBronco235]

Pulled the whole damn steering box out when I could not get the pitman arm off. I guess I should tap it for ram assist now. The good news is the rag joint looks good.

On the bright side, you know it won't fall off on the trail.

I took measurments on mine for a custom bumper with swing out tire carrier. I'm wanting to replace the stock tire carrier since it's looking old and I'm not to trusting of it of late.
Here's a general rough sketch I have going.

 

[Luckychase5]

Got the windows tinted. My wife will he very happy as she is too short for the sun visors to work. No more maps stuck in the windows!
Before

After

 

[Wh1t3nukle]

Used it to get me here a couple days ago.

 

[DaveNay]

Made it legal! Plates & insurance.

 

[jtpaintball70]

Pulled the rest of the dash and gauges from it, so I can start slowly putting the wiring back to stock... and replaced all 8 spark plug

 

[jdinevens]

I dropped about 160 lbs (as measured) of dead weight, and finished putting the T-tracks in the bed......now i've got a big hole in the middle...hmm

 

[AFBronco235]

Stopped by the local 4WheelParts store and picked up a rubber hook saver. Should make my winch rollers look a little cleaner and it won't have the hook just hanging by the tow loops now.