ARB 4Runner Build

[ARB_USA]

I am using the ARB wiring loom wired directly to the battery. Installed the outlet on the same panel as the factory AC and 12v outlets in the rear. This was pretty easy to do and I am far from mechanically inclined.

We replaced the factory outlet and installed a marine grade 12v outlet. This will be used for our ARB LED Adventure light or other accessories. We plan to mount one more outlet to probably as close to the hatch as we can butted up right next to the drawers.

 

[ARB_USA]

Sure, why not. Lets run the biggest ARB Fridge Freezer we have, the 82QT:Wow1::Wow1:

 

[ARB_USA]

Want to see larger photos? Here are all the photos in one spot.

http://www.flickr.com/photos/arb_marketing/sets/72157627071608751/with/5959057128/

 

[Scott Brady]

We can fill it full of beer for the Overland Rally!

 

[ARB_USA]

We can fill it full of beer for the Overland Rally!

The Iron Horse brewery (http://www.ironhorsebrewery.com/) is just down the road. They also fill growlers, and it just so happens that some of us who will be at the rally, currently own empty growlers. :sombrero:

 

[Dave Bennett]

We can fill it full of beer for the Overland Rally!

Yes! :victory:

 

[Scott Brady]

The Iron Horse brewery (http://www.ironhorsebrewery.com/) is just down the road. They also fill growlers, and it just so happens that some of us who will be at the rally, currently own empty growlers. :sombrero:

I know where we are going on Tuesday :victory:

 

[Dgurley2000]

Sure, why not. Lets run the biggest ARB Fridge Freezer we have, the 82QT:Wow1::Wow1:

How far does that sliding drawer come out? Can you snap a photo of it fully extended and with the refrigerator lid open?

 

[Premier Air Filters]

Great build!! Makes me want to upgrade.

 

[homeyclaus]

I'll be excited to see ...

the bill of materials. :Wow1: So that I can start saving, and work on convincing the wife.

Any word on non-lifting higher-weight springs for those of us that still need to fit our 4Runners into 6'8" parking garages?

 

[joneseyyy]

I really like the drawers and the fit looks super clean. After a recent break-in (had a nice air compressor and toolkit stolen) the security of my recovery gear is of heightened importance) I would love to better understand how they are bolted in, and how you guys have "finished" the sides where the drawers structure meets up with the interior trim plastic.

Ben

 

[Redline]

The Iron Horse brewery (http://www.ironhorsebrewery.com/) is just down the road. They also fill growlers, and it just so happens that some of us who will be at the rally, currently own empty growlers. :sombrero:

I was okay with it, but now you guys are making me really rethink missing the NW Rally

I've been partial to a couple 4Runners in my time, nice, keep it up

 

[blvdking]

I'll be excited to see ...

the bill of materials. :Wow1: So that I can start saving, and work on convincing the wife.

A build sheet with prices would be great to see.

 

[adrenaline503]

I saw this yesterday at the warehouse, very very nice. Its going to look sinister when its complete.

 

[ARB_USA]

How far does that sliding drawer come out? Can you snap a photo of it fully extended and with the refrigerator lid open?

Here is a shot with it fully extended. I will take a picture of the lid open here shortly.

About 22.25"