E350/450 Cab-Chassis w/ Composite Box Body - Feedback Requested

[RVflyfish]

Damn, color me envious. Composite boxes with flat walls are the best of all worlds. And with 22° of articulation, L-track, and storage, the Foundation rear subframe sounds excellent. I can’t tell from the two pics on their site, but if the front axle is leaf sprung, it’s probably Ujoint.

 

[luthj]

Yeah, its not cheap, but compared to garbage that typically comes out of Elkhart Indiana... Final build should be comfortable inside from -30 to 115F, reliable, and reasonably capable for a 12,000lb 23ft long vehicle.

 

[iggi]

Foundation vehicles with a globe trekker box. Not sure who did the 4x4 conversion, very well could have been u-joint as they have a shop in Colorado near foundation vehicles.

From this angle it looks like a coil spring front end - if so, not a Ujoint conversion.

 

[RVflyfish]

To me that pic looks like it might be A.I. generated. I only see one perfectly flat steering link, but it’s not connected to anything. And I don’t see any driveshaft coming off the front diff.