chiliVANilli
Adventurer
Thanks! Glad you like it. Yes, I am in Eagle, CO, but hopefully you will get to see Lucinda out and about somewhere other than here.
Lucinda Build
- Thread starter chiliVANilli
- Start date
Thanks! Glad you like it. Yes, I am in Eagle, CO, but hopefully you will get to see Lucinda out and about somewhere other than here.
chiliVANilli
Adventurer
So the brand new fuel pump that gave me issues when I finally went to fire up Lucinda for the first time died on me about a week and half ago. It was an autozone brand, which was the first mistake, so I replaced it with an OEM Delphi model today. Luckily it died in my driveway, not on the road somewhere, but with a full 20 gallons of gas in the tank. It sucked to do replace in the drive way, but oh well, it's done and back on the road!Just when I was getting some of the bugs worked out....
While it was stuck in the driveway, I got started on the insulation. I got a 24" x 100' roll of Reflectix on ebay for $60. Needless to say I have some leftover. Definitely going to be able to double it up.
I also got started on the roof rack, although it was a little hard to do without the van at the shop. I only have the main frame made so far. I still have to finish the mounts for the light bar, and the mounts for the Smittybilt awning, which have both been sitting in the box for about a year. I have to fab some brackets to mount the rack to the van, too, but it has to be in the shop for that, and the front and rear baskets on the rack. And maybe a ladder on the side, I haven't decided on that yet.
While it was stuck in the driveway, I got started on the insulation. I got a 24" x 100' roll of Reflectix on ebay for $60. Needless to say I have some leftover. Definitely going to be able to double it up.
I also got started on the roof rack, although it was a little hard to do without the van at the shop. I only have the main frame made so far. I still have to finish the mounts for the light bar, and the mounts for the Smittybilt awning, which have both been sitting in the box for about a year. I have to fab some brackets to mount the rack to the van, too, but it has to be in the shop for that, and the front and rear baskets on the rack. And maybe a ladder on the side, I haven't decided on that yet.
Corneilius
Adventurer
chiliVANilli
Adventurer
That's too funny! Table is 5' x 15' x 3/4". Luckily the rack is only 5' x 13' for my van.
chiliVANilli
Adventurer
The van still had some wandering issues, so I installed dual steering stabilizers. It definitely made a huge difference and I will keep a little farther from the ditch. I was just going to put a single one on, but I have found the duals definitely help with the wider and big tires.
wanderer-rrorc
Explorer
Check your knuckle angles it may be off and letting her wander
Sent from my VS987 using Tapatalk
Sent from my VS987 using Tapatalk
chiliVANilli
Adventurer
I finally came up with up with an idea for some brackets and had some time to make them. I really never have time, but gotta get things done. I couldn't wait to see if they actually might work and have been dying to see if the rack fits. I also got around to fabbing the tabs to mount the LED light bar. Now I can hopefully find time to mount the Smitybilt awning to it. Oh yeah, and figure what to do about a rear basket, and maybe a small one up front. I like the way rack is looking so far.
Last edited:
chiliVANilli
Adventurer
I will, thanks. I haven't gotten around to changing out any of the rod ends, either, that will probably help, too. So much to do.
GordoSmasho
Observer
Your van looks legit. Super cool
Corneilius
Adventurer
looking good, keep it up. Might have to cut and turn your knuckles to get the caster angle you want
wanderer-rrorc
Explorer
Caster!! That's the word my insane work month wouldn't let me think of!!
Sent from my VS987 using Tapatalk
chiliVANilli
Adventurer
I definitely am going to take her in for an alignment, but I might have made the wandering sound worse than it is. She would just kinda drift a little and get pulled into the worn parts of the road. The dual stabilizers pretty much cleared that up. I'm still going to replace the tie rod ends and any other wear parts to make everything tight and new feeling, and safe. I'm pretty sure the stock stabilizer and ends had never been done on the donor Suburban. I also think the stock van steering box needs to be adjusted, too. Thanks for the advice, and I am always thankful for you guys on here and the wealth of knowledge and experience.
Similar threads
