OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

[Inyo_man]

Looking for mattress opinions. OVRLND Foam vs Roam Rest vs Foambymail. Currently have a Nemo Roamer and it’s just not quite right for my back. Hest is out since they don’t make a size that would work.

I have an 11” cabover so looking at 4” mattress

We are finding our Exped MegaMat, Queen size pad to fit the bill nicely.
It is very warm in winter conditions and super comfortable with combination of foam and air.

Cheers

 

[Double Down]

Looking for mattress opinions. OVRLND Foam vs Roam Rest vs Foambymail. Currently have a Nemo Roamer and it’s just not quite right for my back. Hest is out since they don’t make a size that would work.

I have an 11” cabover so looking at 4” mattress

I have a Roam Rest Pioneer 4", and had them make it to the exact specs of the bed platform and cut it in 2 pieces with no zipper.

I'm super happy with it, very comfortable, maybe better than my mattress at home.

 

[RealRigsRattle]

We are finding our Exped MegaMat, Queen size pad to fit the bill nicely.
It is very warm in winter conditions and super comfortable with combination of foam and air.

Cheers

Tried the Exped Megamat a while back. Just wasn’t a fan of it.

 

[RealRigsRattle]

I have a Roam Rest Pioneer 4", and had them make it to the exact specs of the bed platform and cut it in 2 pieces with no zipper.

I'm super happy with it, very comfortable, maybe better than my mattress at home.

About how long did it take to receive it?

 

[Double Down]

About how long did it take to receive it?

I looked back at my emails, and it took ~2 weeks from order to delivery to me.

 

[RealRigsRattle]

I looked back at my emails, and it took ~2 weeks from order to delivery to me.

Nice! Not too terrible for custom.

 

[Double Down]

Nice! Not too terrible for custom.

Not at all. They do tend to have sales around the big holidays, so if you aren't in a rush, keep your eyes open and subscribe to their e-mails and social media if you have it.

 

[RealRigsRattle]

Interior progress. Insulated with R6 foam board, added a bed rug, and hid some wires. Really liking how it’s coming together

 

[dstefan]

Interior progress. Insulated with R6 foam board, added a bed rug, and hid some wires. Really liking how it’s coming together

It’s looking good!

Re: the Bedrug. Love mine, but I found that with use going in an out and lounging on the TG at camp the thinner foam under the TG compressed into the corrugations on my TG in a way that the interior bed did not as its thicker. Maybe the Ranger’s will be better, but I ended up going back an filling in the valleys in TG. It helped, but I still have ripples in the TG part of the Bedrug I wish I didn’t have.

Might be worth to pull up the TG Bedrug and put something under there to help keep it flat and nice, unless you have a flat TG to start with.

 

[dstefan]

After talking w the company, it was a website shipping glitch that has been fixed. Shipping was only about $50 and I've got one on the way.

Hey @Fergie — Did you ever install these, and if so, what’s your opinion of them?

 

[RealRigsRattle]

It’s looking good!

Re: the Bedrug. Love mine, but I found that with use going in an out and lounging on the TG at camp the thinner foam under the TG compressed into the corrugations on my TG in a way that the interior bed did not as its thicker. Maybe the Ranger’s will be better, but I ended up going back an filling in the valleys in TG. It helped, but I still have ripples in the TG part of the Bedrug I wish I didn’t have.

Might be worth to pull up the TG Bedrug and put something under there to help keep it flat and nice, unless you have a flat TG to start with.

The corrugations on the tailgate are deep and many, so I'll have to get them filled in sooner than later!

 

[Phessor]

Nice work adding the cameras F/R, that helps a ton. I did something similar to my truck.

Any reason you mounted the rear camera above the brake light?

From my experience, mounted that way at night, all you will see is the red LEDs.

I mounted my rear camera up high as well. Down low I had more water spray in rain and snow covered roads. I still get a little, but much better now.

 

[Fergie]

Hey @Fergie — Did you ever install these, and if so, what’s your opinion of them?

I did indeed install the bed support. Install itself it straightforward, and I gave the mfg some feedback as to providing longer hardware, but other than that, pretty easy.

Now, what I don’t like is the squeaking. Every team movement of the bed has a metal on metal squeak from where the crossmember rubs the lip edge of the bed. Thankfully, I’m too lazy to get under and remove it, but I can see it making another more OCD person insane.

 

[dstefan]

I did indeed install the bed support. Install itself it straightforward, and I gave the mfg some feedback as to providing longer hardware, but other than that, pretty easy.

Now, what I don’t like is the squeaking. Every team movement of the bed has a metal on metal squeak from where the crossmember rubs the lip edge of the bed. Thankfully, I’m too lazy to get under and remove it, but I can see it making another more OCD person insane.

Glad it was straightforward; that’s drag on the squeaking. I’d be the person who would go nuts with that!

Is the squeaking audible in the cab while driving, the camper while you’re moving around or both?

 

[Phessor]

Has anyone ever made their own Arctic Pack Canvas Insulation Liner? I am sure I can live without it, I have so far. But $800.00 is way more than I want to pay for a liner in my camper.