Get your tickets to THE BIG THING 2026!
Some I look at say for paved areas only. Just want to make whatever I get could handle snow on a dirt road, and maybe mud if needed in a pinch. I would not be using chains to push the capabilities if this RV the clearance is terrible on it.BTW, running chains without snow/ice can do a job on your tires, they aren't for mud. Never used them in sand so no idea, seems sand could be much like snow.
Some I look at say for paved areas only. Just want to make whatever I get could handle snow on a dirt road, and maybe mud if needed in a pinch. I would not be using chains to push the capabilities if this RV the clearance is terrible on it.
type then add more and MORE (bungee cords) depending on (centrifical force) how fast I want to travel. Lite chains will pull apart (bring tools) if used aggesibly in the dirt/rock but they don't dig as fast so it takes longer to be high centered.
+ quick links are brought with the V bar chains.
IdaSHO's advice to air down is also great, but I don't do it that way... Lowering tire pressure makes the ride 10x better with chains, and further increases your traction. Both things are welcome if you must drive for miles with chains on. (This is obviously not highway use advice...) I have not found that airing up most tires tightens the chains much, so my advice is still to stop and tighten a few times. The chains with the turn cams are good for this. You can install them, then tighten one or two cams, drive a little, and tighten a few more cams. If you run out of cams to tighten, loosen them all and hook one link shorter, then start again. Once they are tight, they will not come off.
FWIW, I have also not seen any tire damage from running chains, and plowing 10 miles, I rack up a LOT of miles with chains mounted...