It ain't pretty, but it is perfectly functional. Steel Power Tank mount and aluminum handle. How about $50 plus shipping?
[/url]r5vHCURNSM+R%I9aWg1T1A by Steve Stewart, on Flickr[/IMG]
Hi - I have a Garmin 60Csx in great shape. Includes 24k US Southwest Topo and City Navigator for all of North America. Windshield suction mount, handlebar mount, power cord and manual. $140 shipped.
[/url]UaskKelsRim22sTSkhbDXA by Steve Stewart, on Flickr[/IMG]
[/url]fullsizeoutput_862 by...
I've had an e350 4x4 and currently have a Quigley Transit with ecoboost. I can tell you there is no comparison. It is as fast as a 6.0 or 7.3 power stroke and way faster than a 5.4, with no drama. Quiet and gets an honest 15-16mpg. The Transit is superior in every way except the fact that you...
My transit is gas - ecoboost. I mounted the 5-gallon diesel tank right next to the gas tank on the driver's side just aft of where the fuel fill door is. There is tons of room there. Could do a much larger tank. The fill door has room for the gas fill and diesel fill there. I used the diesel...
I have a Propex propane in my Westy and it doesn't do the job below 10F or so. To be honest, it is fine for camping for ski trips, but I live in my van part time, working 180 miles from home. I need to sleep well, wake up and go to work. I'm not interested in staying warm enough to survive. I...
I'm really curious about the gelling aspect. I know the OP was talking about a gas van, but I'm on my second gas van with an auxiliary diesel tank to run the diesel heater. I think it is a good combo for someone who is full timing in a van (I'm 3 nights per week all fall, winter and spring). The...
I replaced this...
[/url]IMG_1708 by Steve Stewart, on Flickr[/IMG]
With this...
IMG_0224 by Steve Stewart, on Flickr
2017 Transit Quigley 4x4 HR LWB. Ecoboost and 3.31 Ltd Slip. Couldn't be happier. The lift from Quigley is 2". I was, with one beer, one hour, and a grinder, able to fit...
2006 Sportsmobile RB31 4x4 Ford E350. 61,700 miles
5.4 gas V8
MG Metalworks/Ujoint Off-Road 4x4 swap done with all the best components
Front Dana 60 with 4.30s and 14.29" brakes, Dynatrac hubs (no unit bearings!), Dynatrac balljoints
Rear Sterling 10.5 with 4.30 limited slip.
Aluminess front and...
Raul - my van is rented out until Wednesday. I can send you a picture then. MG sent me a pdf template that I printed out and taped up to mark the crossmember. You might ask him directly. Seems like another inch or so, especially on the driver's side. I would take as much out of the driver's side...
I installed straight in on one side and used a .5mm shim (washer) on the other side. When you spin the hub you can tell if there is interference. I haven't had a chance to test it on loose ground yet. Note: both sensors were the exact same length as the ones that came out of my 2013 axle. Also...
Congrats Jim! The MG swap does feel good, doesn't it? Please let us know how you take care of the ABS problem. That is the only thing I have left undone. Mine is a 2006. I picked up some circa 2006 ABS sensors from a Dana 60, but haven't swapped them in yet. I'm at about 9k miles since I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.