The rings are from the local bolt shop, most bolt hardware stores have this type of item in stock they come in various sizes.
fuso 4x4 rebuild
- Thread starter alan
- Start date
The rings are from the local bolt shop, most bolt hardware stores have this type of item in stock they come in various sizes.
thats what came on the winches but i will be changing it in the future to synthetic rope.
whatcharterboat
Supporting Sponsor, Overland Certified OC0018
Hi Alan,
Looking good. What is that powdercoat colour/texture called? Bit hard to tell......it's not Ripple Black is it?
Kind regards
John
Hi John, its ute liner spray, Raptor brand from memory, i just mixed it and used a body deadener spray gun it really is great stuff, sticks to anything and sets rock hard!
SkiFreak
Crazy Person
Will you be changing the roller fairlead to a hawse fairlead too, or will you stick with the roller fairlead for the synthetic rope?
I think a hawse fairlead would look nicer on that bar.
I will change it to a hawse fairlead when the time comes, we have been so busy lately with no time to play:smiley_drive:
SkiFreak
Crazy Person
Where's the fun in that?
whatcharterboat
Supporting Sponsor, Overland Certified OC0018
Yeah???? Wow. Looks great. I should do my whole car with it.....it could just continue rusting away and no one would care. Hahaha.
No the color is great!
We have been very busy lately and no time to play with projects, unfortunately projects don't pay the bill's, but it is still progressing slowly will put some pic's up soon:smiley_drive:
Hi Alan,
Your project is looking really good, well done. I haven't checked in for a while. Just about to get serious with my project after a few of life's ups and downs. I read on a page you have diff centres, don't suppose a 5.714 ratio would be available?. Also interested in alloy wheels a bit later.
Regards
Rob from Newcastle.
Your project is looking really good, well done. I haven't checked in for a while. Just about to get serious with my project after a few of life's ups and downs. I read on a page you have diff centres, don't suppose a 5.714 ratio would be available?. Also interested in alloy wheels a bit later.
Regards
Rob from Newcastle.
Hi Rob,
I have been out of action for a few weeks, in hospital for a little modification! i hope to get stuck back into the truck this weekend
we have front LSD centres but no gears sorry, plenty of alloy wheels in stock, don't forget to post pic's of your project.Hope the mods went well and you're on the mend Alan.
I will probably get a diff centre from you as I move through the project. Should be able to get the gears from Mitsubishi without any problems. Wheels will come toward the end of course, love the look of yours.
I'll post some pic's and give some detail soon.
Cheers
Rob
I will probably get a diff centre from you as I move through the project. Should be able to get the gears from Mitsubishi without any problems. Wheels will come toward the end of course, love the look of yours.
I'll post some pic's and give some detail soon.
Cheers
Rob
Similar threads
