Lone Peak Overland

[Antwon412]

Picked mine up yesterday and drove it home to Northern California. Found a spot to sleep in a bit off the highway and really enjoyed it. The mattress is super comfortable.

 

[TexasSixSeven]

Just wire in a cigarette lighter outlet directly from the battery or juicebox.

I did this at first, but had issues keeping my cigarette plug plugged in. I ended up just cutting the 12V fridge wire, and wiring it directly into the Juicebox. It’s worked well this way.

 

[simple]

Picked mine up yesterday and drove it home to Northern California. Found a spot to sleep in a bit off the highway and really enjoyed it. The mattress is super comfortable.

View attachment 839505View attachment 839506View attachment 839507

Looks great on the Jeep!

 

[Geoyota82]

Has anyone else had issues with there back hatch.

I was out camping and went to push it open from the inside and it popped out of the upper c channel.

I will be taking it in for warranty but just seeing if anyone else has seen
this issue.

 

[1titanfan]

Picked mine up yesterday and drove it home to Northern California. Found a spot to sleep in a bit off the highway and really enjoyed it. The mattress is super comfortable.

View attachment 839505View attachment 839506View attachment 839507

That’s great. I picked mine up on Tuesday and made the long truck back to socal. I agree the mattress is awesome.

 

[ulag]

The 3d builder is sort of cool. I checked it out when it came out last week. it was sort of funny that the main reason that I bought a lone peak camper is that they were the only ones building a camper for a Nissan titan, just a little ironic me thinks that it’s not on the list of available trucks. Maybe they will add it to the list of trucks some day. On another note, any of y’all out that have purchased ULAG products door latch cover from Tyler had any problems with the side ones “flapping about? I was going to get a set but I did see a video of a guy that had that same issue. anyway just waiting for my juicebox to arrive.

I am guessing you had seen Baum Outdoors video? Im upfront with any questions. I have had 3 people reach out that had the same issue (Think I am at 63 sets sold total), I originally had the magnets inset a bit to not make any contact with the handle itself, but after the first one was brought to my attention, I made some changes and the magnets are flush and should stick directly to the handles now. I have sent replacements to everyone who had issues, and have not heard back from any that the issue occurred again. Tested them for a month before offering them, and still have the original set on my truck (4 months, 10k miles) and have had no issues. I believe its just some trucks aerodynamics make the wind come around and hit the handles at a certain angle. 2 have had issues on a tacoma, and one on an f250 I believe.

Sorry I dont get online much, so just saw the question! Hope everyone is stoked on having or getting their camper, has made trail sleeping much more enjoyable for us!

 

[1titanfan]

I am guessing you had seen Baum Outdoors video? Im upfront with any questions. I have had 3 people reach out that had the same issue (Think I am at 63 sets sold total), I originally had the magnets inset a bit to not make any contact with the handle itself, but after the first one was brought to my attention, I made some changes and the magnets are flush and should stick directly to the handles now. I have sent replacements to everyone who had issues, and have not heard back from any that the issue occurred again. Tested them for a month before offering them, and still have the original set on my truck (4 months, 10k miles) and have had no issues. I believe its just some trucks aerodynamics make the wind come around and hit the handles at a certain angle. 2 have had issues on a tacoma, and one on an f250 I believe.

Sorry I dont get online much, so just saw the question! Hope everyone is stoked on having or getting their camper, has made trail sleeping much more enjoyable for us!

thanks for the info. I am still interested in getting a set but I wanted to know if you would just sell 1ea?

 

[ulag]

thanks for the info. I am still interested in getting a set but I wanted to know if you would just sell 1ea?

Hadn't thought about selling them in singles. I will try to remember to add them to my etsy store tomorrow

 

[Jpcarm]

Can confirm now… worth the wait!

 

[Antwon412]

I am guessing you had seen Baum Outdoors video? Im upfront with any questions. I have had 3 people reach out that had the same issue (Think I am at 63 sets sold total), I originally had the magnets inset a bit to not make any contact with the handle itself, but after the first one was brought to my attention, I made some changes and the magnets are flush and should stick directly to the handles now. I have sent replacements to everyone who had issues, and have not heard back from any that the issue occurred again. Tested them for a month before offering them, and still have the original set on my truck (4 months, 10k miles) and have had no issues. I believe its just some trucks aerodynamics make the wind come around and hit the handles at a certain angle. 2 have had issues on a tacoma, and one on an f250 I believe.

Sorry I dont get online much, so just saw the question! Hope everyone is stoked on having or getting their camper, has made trail sleeping much more enjoyable for us!

I’ve been having the flapping issue also. In my case it’s only on the side I have my awning on. I believe the mounted awning couses some weird turbulence. It flapped pretty much the entire 2000 mile trip I just took the the Southwest.
it actually started to wear away the finish on my hatch door.

Maybe you could offer an option with stronger magnets?

I think I’m going to try buying a very thin stronger magnet and try to inset it flush in the bottom of the flap.

Still very happy with them. They kept the mud and dust out of the locks and make it look very finished.

 

[ulag]

I’ve been having the flapping issue also. In my case it’s only on the side I have my awning on. I believe the mounted awning couses some weird turbulence. It flapped pretty much the entire 2000 mile trip I just took the the Southwest.
it actually started to wear away the finish on my hatch door.

Maybe you could offer an option with stronger magnets?

I think I’m going to try buying a very thin stronger magnet and try to inset it flush in the bottom of the flap.

Still very happy with them. They kept the mud and dust out of the locks and make it look very finished.

Shoot me a message on Etsy, and I can send out a set with the magnets flush, and we can see if that takes care of the problem

 

[Antwon412]

Shoot me a message on Etsy, and I can send out a set with the magnets flush, and we can see if that takes care of the problem

Thanks for that.

And to be 100% clear for everybody here reading this, I am not saying anything bad about the product at all. It works 100% as advertised and I am very happy with them.

The flutterimg I am experiencing is 100% because of the awning that I mounted.

I would 100% buy these again and recommend them to anybody who has a LPC..

 

[Jpcarm]

Not sure if anyone can answer this, but I have the power plate, battery, and 1 solar panel. I have noticed at 100% battery I get 4-5 loud beeps from the inverter and it shuts down for a few seconds but then powers back up. I am running a fridge off of it only when it has happened, it will do this for an hour or so on/off on/off then go back to normal full operation after I turn lights on, or add more power consuming items. I assume the warning is a full charge protection, but how do I manage the solar input in the first place so it stops charging?

 

[Kamikazee494]

Just had my build consult this morning with Kecia. Super smooth process. Added a whole bunch of goodies to the final build. Fingers crossed, install will happen before August.

 

[johnnumbers]

So any reports about how these are holding up or issues?