scrubber3
Not really here
Finished up today. Here is the finished product on the right side and as I was doing the left. They only needed minor adjustments as they were designed for a toyota.




Yes, I used gussets and angled them at 45 degrees down. Two in the middle and one for the front and rear of each side. I put a coat of primer, then 3 coats of bedliner. A mix of the thinner gritty kind and the thick rubbery kind. This should keep anyone from slipping from using it as a step. I angled them upwards and kicked the rear out just a bit. I figure that may help turn me around the big stuff. Plus it looks better that way IMHO.




Yes, I used gussets and angled them at 45 degrees down. Two in the middle and one for the front and rear of each side. I put a coat of primer, then 3 coats of bedliner. A mix of the thinner gritty kind and the thick rubbery kind. This should keep anyone from slipping from using it as a step. I angled them upwards and kicked the rear out just a bit. I figure that may help turn me around the big stuff. Plus it looks better that way IMHO.
Last edited: