Overland XJs Unite!

[VanIsle_Greg]

I completely missed this, sorry about that. I LOVE the IRO double shear track bar. I've tried a lot of different track bars and I always come back to them. As for the IRO steering, it's really not worth it anyway. Serious Offroad has really good steering that uses GM 1 ton TRE's and is cheaper than what IRO offers. Honestly, one of the best upgrades i've ever done is the full WJ swap. The brakes are 100x better than stock XJ and the steering is great!

Good to know... will check that out.

 

[goodcat8]

Recently released. Great truck.
2000 XJ 2.5" OME lift and various other fun bits.

 

[VanIsle_Greg]

^^ That looks good.

 

[bashmore]

Not a super overlandy picture, but whatever. Its my DD and we're building it into an overland rig as we go. Custom roof rack and hopefully RTT this season, $$ permitting.

99 Sport.
3" rustys spring lift. '14 JK wheels and tires, locked rear, SYE, warn front bumper w/ air tank, on board air, JCR crusader sliders. unknown rear bumper and tire carrier. unknown 8k lb winch. drawer system in the back. The guy I bought it from did most of the work, Im just reaping the benefits.

 

[Zeiderman]

Well here's mine again, last pic was of getting new rotors installed. This one is after new to me (and still pretty new) Maxxis BS mudders, 31x10.5x15. and Monroe load leveler shocks in the rear. Next up interior electrical.

 

[mnewxcv]

Recently released. Great truck.
2000 XJ 2.5" OME lift and various other fun bits.

could you link me to a source for those wheels?

 

[SavMan]

2000 XJ 4.0 with SS headers & custom catless SS exhaust

Dana 30 HP 4.56
8.25 4.56
Lokka Front
Custom Bumpers, Rock rails with removable winch plate in truck bed finish
OME Springs with add a leaf and 1.5 inch spacer
homemade bumpstops
32" pizza cutters Copper SST
Cut & Fold Fenders
HD Offroad Shackle Relocation
JKUR 10th Anniversary Shocks
Homemade BPE
Bucket Seats
Roof Rack, Roof mounted spare
Light Bar & Front & Rear Spots
ARB Outback Drawers
Rattle can paint finish

 

[F40]

Built a new rack recently.

 

[mtbxj87]

nice f40. I cut up my confer rack and now its a flat rack.

 

[Overland History]

Built a new rack recently.

That looks great Pat! Any pics of the build?

 

[F40]

That looks great Pat! Any pics of the build?

Thanks! I took a few... The outside is 1.25" .125 tube, the cross bars are 1" tube. The feet for the gutter mounts are 3/16" plate, the clamp portion is 1/8" plate (maybe thinner? .080?) I left it raw so I could make changes, I may add another cross bar to the rear under the tent, but it's already quite solid. Hardware is M8 bolts threaded into flanged lock nuts.

 

[XJSuperman]

Are those your custom mounts then? Looks great. Almost makes me want to redesign mine...

 

[F40]

Are those your custom mounts then? Looks great. Almost makes me want to redesign mine...

They are. The raw clamp plates are slotted for adjustability.

 

[96inline6]

my 1996 in its natural habitat as a fishing rig. still need a roof rack with awning and roof top tent. will be ordering a winch and 7 inch hid offroad lights with yellow polycarbonate sense covers for snow and rain.

 

[Utahdriven]

Nice looking rigs!!!!!